прямой выход на линию

по сути, в отрыве от эластикса и парабела нужно набрав определенную комбинацию поднять трубку на fxo порту и соединить ее с внутренним абонентом. как? :-(

39.1 DIAL 0 FOR OUTSIDE LINE

There will be times when a user would like to get an outside line something similar to a PABX by simply dialling a number e.g. 0 or 9.

I got around it by creating an entry in extensions_custom.conf.

In my case I use 0 as the prefix to get an outside line.

I have also pre-recorded a voice prompt to instruct the caller what to do after the second dial tone.

39.1.1  Using Zaptel Card Method 

;############################################## 
; To get outside line through ZAP - Ben 22-12-2005 
; after dialling 0 will get a second dial tone.  
; Then dial the number required. 
; No need to press the send button after the second number dialled 
;############################################## 

exten => 0,1,Playback(start-dial-after-dialtone) 
;exten => 0,2,Dial(ZAP/1/{EXTEN}) ; < -- if using zaptel 
exten => 0,2,Dial(DAHDI/1/{EXTEN}) ; < -- if using DAHDI 
exten => 0,3,Hangup 

The example above is based on systems that have Zaptel card (e.g. TDM400 or 
X100P etc.) installed.  Note:* If you're using a PRI line, you need to enable 
'overlapdial' in /etc/asterisk/zapata.conf for this to work.

В случае FreePBX это нужно вписать в extension_custom.conf