История изменений [назад]

AT^DDSETEX failed
 
AT^DDSETEX failed> [Mar 31 09:59:04] ERROR[28458]:
 
 
atresponse.c:475 atresponseerror:
  [datacard1] Dial failed
      -- Datacard/datacard1-0100000000 is circuit-busy

circuit-busy == Everyone is is busy/congested at this time (1:0/1/0) -- Auto fallthrough, channel 'SIP/71-00000000' status is 'CONGESTION' is 'CONGESTION' [Mar 31 09:59:04] ERROR[28458]: atresponse.c:480 atresponseerror: [datacard1] AT^DDSETEX failedAT^DDSETEX failed

datacard.conf

[datacard1] context=incoming-datacard
audio=/dev/ttyUSB1
data=/dev/ttyUSB2
group=2
rxgain=3
txgain=3
autodeletesms=yes
resetdatacard=yes
u2diag=0
usecallingpres=yes
callingpres=allowedpassedscreen

extensions.conf

exten => _0ХХХХХХХХХ,1,dial(Datacard/datacard1/${EXTEN})

И не звонит( Кто с таким встречался?

datacard1 2 Free 12 3 3 DJUICE E153 11.609.18.20.174 354809040429017 255030660035422 +380000000000

datacard show device state datacard1 -------------- Status ------------- Device : datacard1 State : Free Audio : /dev/ttyUSB1 Data : /dev/ttyUSB2 Voice : Yes SMS : Yes Manufacturer : huawei Model : E153 Firmware : 11.609.18.20.174 IMEI : 354809040429017 IMSI : 255030660035422 GSM Registration Status : Registered, home network RSSI : 11, -119 dBm Mode : GSM/GPRS Submode : EDGE Provider Name : DJUICE Location area code : 7DA0 Cell ID : 242D Subscriber Number : +380000000000? SMS Service Center : +380672021111 Use UCS-2 encoding : Yes USSD use 7 bit encoding : No USSD use UCS-2 decoding : Yes Tasks in queue : 0 Commands in queue : 0 Call Waiting : Enabled Current device state : start Desired device state : start Calls/Channels : 0 Active : 0 Held : 0 Dialing : 0 Alerting : 0 Incoming : 0 Waiting : 0 Releasing : 0 Initializing : 00 AT^DDSETEX failed

AT^DDSETEX failed

AT^DDSETEX failed>

[Mar 31 09:59:04] ERROR[28458]:
 
 
atresponse.c:475 atresponseerror:
  10:20:38] ERROR[28678]: at_response.c:475 at_response_error: [datacard1] Dial failed
 -- Datacard/datacard1-0100000000 is circuit-busy circuit-busy
  == Everyone is
  is busy/congested at this time (1:0/1/0)
 -- Auto fallthrough, channel 'SIP/71-00000000' 'SIP/71-0000000a' status is
  'CONGESTION' is 'CONGESTION'
[Mar 31 09:59:04]
  ERROR[28458]: atresponse.c:480
  atresponseerror: [datacard1]
  10:20:38] ERROR[28678]: at_response.c:480 at_response_error: [datacard1] AT^DDSETEX failedAT^DDSETEX failed
 failed

datacard.conf

[datacard1]
context=incoming-datacard 

audio=/dev/ttyUSB1 
 
data=/dev/ttyUSB2 
 
group=2 
 
rxgain=3 
 
txgain=3 
 
autodeletesms=yes 
 
resetdatacard=yes 
 
u2diag=0 
 
usecallingpres=yes 

callingpres=allowedpassedscreen 
            
callingpres=allowed_passed_screen

exten => _0ХХХХХХХХХ,1,dial(Datacard/datacard1/${EXTEN})
_0ХХХХХХХХХ,1,dial(Datacard/datacard1/${EXTEN})

datacard1    2     Free 12   3    3       DJUICE         E153       11.609.18.20.174  354809040429017  255030660035422  +380000000000
+380000000000

 -------------- Status -------------
   Device                  : datacard1
   State                   : Free
   Audio                   : /dev/ttyUSB1
   Data                    : /dev/ttyUSB2
   Voice                   : Yes
   SMS                     : Yes
   Manufacturer            : huawei
   Model                   : E153
   Firmware                : 11.609.18.20.174
   IMEI                    : 354809040429017
   IMSI                    : 255030660035422
   GSM Registration Status : Registered, home network
   RSSI                    : 11, -119 dBm
   Mode                    : GSM/GPRS
   Submode                 : EDGE
   Provider Name           : DJUICE
   Location area code      : 7DA0
   Cell ID                 : 242D
   Subscriber Number       : +380000000000?
   SMS Service Center      : +380672021111
   Use UCS-2 encoding      : Yes
   USSD use 7 bit encoding : No
   USSD use UCS-2 decoding : Yes
   Tasks in queue          : 0
   Commands in queue       : 0
   Call Waiting            : Enabled
   Current device state    : start
   Desired device state    : start
   Calls/Channels          : 0
     Active                : 0
     Held                  : 0
     Dialing               : 0
     Alerting              : 0
     Incoming              : 0
     Waiting               : 0
     Releasing             : 0
     Initializing          : 0
AT^DDSETEX failed