Пожалуйста, войдите здесь. Часто задаваемые вопросы О нас
Задайте Ваш вопрос

конфиг неверный AddPac AP-GS1001

0

не один ip не отвечает в консоль приглашение не дает

конфигурационный файл не верный

что делать помогите!!!!!!!!

System Bootstrap, Version 1.2 Decompressing the image: ################################################################################ ################################################################################ ########################[OK] œ AddPac GS1002 Series (GS1002_G2) 32BIT RISC Processor With 125MHz Clock 32 Mbytes System Memory. 512 Kbytes System Boot Flash Memory 4 Mbytes System Flash Memory

1 RS232 Serial Console Interface

GS1002_G2 System software Revision 8.51.008 Released at Tue Jun 5 17:23:35 2012 Program is 2815752 bytes, checksum is 0x16a22bbd

UTC Time is Sat Jun 15 18:05:55 2013 Copyright (c) by AddPac Technology Co., Ltd. Since 1999.

Allocating system mbuffer counter: 1536 Kernel callwheelmask 0x3ff callwheelsize 1024 Local flash disk integrity checking. Loading file system(ver2.2), flash-base: 0xb03d0000 ram-base: 0x956f6f7c Loading secondary file system(ver2.2) flash-base: 0xb03c0000 ram-base: 0x95b52b7 8 Ethernet port initialization complete Ethernet port initialization complete System utilization reference (15/15/15/15) Start Target Debug Server Attach FastEthernet Interface at Slot 0, Port 0-1, <0-0>/<0-1> Interface FastEthernet0/0, changed state to DOWN Interface FastEthernet0/1, changed state to DOWN Hardware Type ID = 2 Hardware Revision ID = 0 Slot (0) AP-GSM2O2 : VoIP module 2 GSM + 2 FXO

Slot (0) Module type : GnO

GsSim Start Start SendMail Server Error occured during reading below line at %s(config)# (5). ip address 192.168.1.11 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). ip address 192.168.10.1 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). fax protocol t38 redundancy 0

Error occured during reading below line at %s(config)# (5). fax rate 9600

Error occured during reading below line at %s(config)# (5). h323 call start fast

Error occured during reading below line at %s(config)# (5). h323 call tunnel enable

Error occured during reading below line at %s(config)# (5). no call-barring unconfigured-ip-address

Error occured during reading below line at %s(config)# (5). no voip-inbound-call-barring enable

Error occured during reading below line at %s(config)# (5). connection plar 201

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). connection plar 203

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). port 0/0

Error occured during reading below line at %s(config)# (5). user-name gsm1

Error occured during reading below line at %s(config)# (5). user-password gsm1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 1

Error occured during reading below line at %s(config)# (5). port 0/2

Error occured during reading below line at %s(config)# (5). user-name fxo1

Error occured during reading below line at %s(config)# (5). user-password fxo1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 3

Error occured during reading below line at %s(config)# (5). port 0/3

Error occured during reading below line at %s(config)# (5). user-name fxo2

Error occured during reading below line at %s(config)# (5). user-password fxo2pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 4

Error occured during reading below line at %s(config)# (5). session target sip-server

Error occured during reading below line at %s(config)# (5). session protocol sip

Error occured during reading below line at %s(config)# (5). voice-class codec 1

Error occured during reading below line at %s(config)# (5). no vad

Error occured during reading below line at %s(config)# (5). dtmf-relay rtp-2833

Error occured during reading below line at %s(config)# (5). sip-server 109.110.188.171

Error occured during reading below line at %s(config)# (5). called-party-number to-field

Error occured during reading below line at %s(config)# (5). remote-party-id

Error occured during reading below line at %s(config)# (5). register e164

Press RETURN to get started.

RTA Module Ready CPU internal DSP SRAM .... OK Audio DSP S/W download ... OK QSLAC (0) clock sync ..... OK

GsSim Ready get voip interface address fail !

VoipGateway::Init1 - No IP address on the VoIP Interface [25.670] MOBILE-0/0: module initialization failure (err=0x80) MOBILE-0/0: MODULE ID = GC864-QUAD MOBILE-0/1: MODULE ID = GC864-QUAD [29.870] MOBILE-0/1: SIM READY [49.070] Interface MOBILE-0/1, changed state to UP onsole Interface

GS1002_G2 System software Revision 8.51.008 Released at Tue Jun 5 17:23:35 2012 Program is 2815752 bytes, checksum is 0x16a22bbd

UTC Time is Sat Jun 15 18:13:43 2013 Copyright (c) by AddPac Technology Co., Ltd. Since 1999.

Allocating system mbuffer counter: 1536 Kernel callwheelmask 0x3ff callwheelsize 1024 Local flash disk integrity checking. Loading file system(ver2.2), flash-base: 0xb03d0000 ram-base: 0x956f6f7c Loading secondary file system(ver2.2) flash-base: 0xb03c0000 ram-base: 0x95b52b7 8 Ethernet port initialization complete Ethernet port initialization complete System utilization reference (15/15/15/15) Start Target Debug Server Attach FastEthernet Interface at Slot 0, Port 0-1, <0-0>/<0-1> Interface FastEthernet0/0, changed state to DOWN Interface FastEthernet0/1, changed state to DOWN Hardware Type ID = 2 Hardware Revision ID = 0 Slot (0) AP-GSM2O2 : VoIP module 2 GSM + 2 FXO

Slot (0) Module type : GnO

GsSim Start Start SendMail Server Error occured during reading below line at %s(config)# (5). ip address 192.168.1.11 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). ip address 192.168.10.1 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). fax protocol t38 redundancy 0

Error occured during reading below line at %s(config)# (5). fax rate 9600

Error occured during reading below line at %s(config)# (5). h323 call start fast

Error occured during reading below line at %s(config)# (5). h323 call tunnel enable

Error occured during reading below line at %s(config)# (5). no call-barring unconfigured-ip-address

Error occured during reading below line at %s(config)# (5). no voip-inbound-call-barring enable

Error occured during reading below line at %s(config)# (5). connection plar 201

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). connection plar 203

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). port 0/0

Error occured during reading below line at %s(config)# (5). user-name gsm1

Error occured during reading below line at %s(config)# (5). user-password gsm1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 1

Error occured during reading below line at %s(config)# (5). port 0/2

Error occured during reading below line at %s(config)# (5). user-name fxo1

Error occured during reading below line at %s(config)# (5). user-password fxo1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 3

Error occured during reading below line at %s(config)# (5). port 0/3

Error occured during reading below line at %s(config)# (5). user-name fxo2

Error occured during reading below line at %s(config)# (5). user-password fxo2pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 4

Error occured during reading below line at %s(config)# (5). session target sip-server

Error occured during reading below line at %s(config)# (5). session protocol sip

Error occured during reading below line at %s(config)# (5). voice-class codec 1

Error occured during reading below line at %s(config)# (5). no vad

Error occured during reading below line at %s(config)# (5). dtmf-relay rtp-2833

Error occured during reading below line at %s(config)# (5). sip-server 109.110.188.171

Error occured during reading below line at %s(config)# (5). called-party-number to-field

Error occured during reading below line at %s(config)# (5). remote-party-id

Error occured during reading below line at %s(config)# (5). register e164

Press RETURN to get started.

RTA Module Ready CPU internal DSP SRAM .... OK Audio DSP S/W download ... OK QSLAC (0) clock sync ..... OK

GsSim Ready get voip interface address fail !

VoipGateway::Init1 - No IP address on the VoIP Interface [25.670] MOBILE-0/0: module initialization failure (err=0x80) MOBILE-0/0: MODULE ID = GC864-QUAD MOBILE-0/1: MODULE ID = GC864-QUAD [29.870] MOBILE-0/1: SIM READY

System Bootstrap, Version 1.2 Decompressing the image: #########################[OK] œ System Boot Loader, Version 5.2.4 Copyright (c) by AddPac Technology Co., Ltd. Since 1999.

System Bootstrap, Version 1.2 Decompressing the image: ################################################################################ ################################################################################ ########################[OK] œ AddPac GS1002 Series (GS1002_G2) 32BIT RISC Processor With 125MHz Clock 32 Mbytes System Memory. 512 Kbytes System Boot Flash Memory 4 Mbytes System Flash Memory

1 RS232 Serial Console Interface

GS1002_G2 System software Revision 8.51.008 Released at Tue Jun 5 17:23:35 2012 Program is 2815752 bytes, checksum is 0x16a22bbd

UTC Time is Sat Jun 15 18:14:37 2013 Copyright (c) by AddPac Technology Co., Ltd. Since 1999.

Allocating system mbuffer counter: 1536 Kernel callwheelmask 0x3ff callwheelsize 1024 Local flash disk integrity checking. Loading file system(ver2.2), flash-base: 0xb03d0000 ram-base: 0x956f6f7c Loading secondary file system(ver2.2) flash-base: 0xb03c0000 ram-base: 0x95b52b7 8 Ethernet port initialization complete Ethernet port initialization complete System utilization reference (15/15/15/15) Start Target Debug Server Attach FastEthernet Interface at Slot 0, Port 0-1, <0-0>/<0-1> Interface FastEthernet0/0, changed state to DOWN Interface FastEthernet0/1, changed state to DOWN Hardware Type ID = 2 Hardware Revision ID = 0 Slot (0) AP-GSM2O2 : VoIP module 2 GSM + 2 FXO

Slot (0) Module type : GnO

GsSim Start Start SendMail Server Error occured during reading below line at %s(config)# (5). ip address 192.168.1.11 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). ip address 192.168.10.1 255.255.255.0

Error occured during reading below line at %s(config)# (5). speed auto

Error occured during reading below line at %s(config)# (5). no qos-control

Error occured during reading below line at %s(config)# (5). fax protocol t38 redundancy 0

Error occured during reading below line at %s(config)# (5). fax rate 9600

Error occured during reading below line at %s(config)# (5). h323 call start fast

Error occured during reading below line at %s(config)# (5). h323 call tunnel enable

Error occured during reading below line at %s(config)# (5). no call-barring unconfigured-ip-address

Error occured during reading below line at %s(config)# (5). no voip-inbound-call-barring enable

Error occured during reading below line at %s(config)# (5). connection plar 201

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). connection plar 203

Error occured during reading below line at %s(config)# (5). no caller-id enable

Error occured during reading below line at %s(config)# (5). port 0/0

Error occured during reading below line at %s(config)# (5). user-name gsm1

Error occured during reading below line at %s(config)# (5). user-password gsm1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 1

Error occured during reading below line at %s(config)# (5). port 0/2

Error occured during reading below line at %s(config)# (5). user-name fxo1

Error occured during reading below line at %s(config)# (5). user-password fxo1pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 3

Error occured during reading below line at %s(config)# (5). port 0/3

Error occured during reading below line at %s(config)# (5). user-name fxo2

Error occured during reading below line at %s(config)# (5). user-password fxo2pass

Error occured during reading below line at %s(config)# (5). translate-outgoing called-number 4

Error occured during reading below line at %s(config)# (5). session target sip-server

Error occured during reading below line at %s(config)# (5). session protocol sip

Error occured during reading below line at %s(config)# (5). voice-class codec 1

Error occured during reading below line at %s(config)# (5). no vad

Error occured during reading below line at %s(config)# (5). dtmf-relay rtp-2833

Error occured during reading below line at %s(config)# (5). sip-server 109.110.188.171

Error occured during reading below line at %s(config)# (5). called-party-number to-field

Error occured during reading below line at %s(config)# (5). remote-party-id

Error occured during reading below line at %s(config)# (5). register e164

Press RETURN to get started.

RTA Module Ready CPU internal DSP SRAM .... OK Audio DSP S/W download ... OK QSLAC (0) clock sync ..... OK

GsSim Ready get voip interface address fail !

VoipGateway::Init1 - No IP address on the VoIP Interface [25.670] MOBILE-0/0: module initialization failure (err=0x80) MOBILE-0/0: MODULE ID = GC864-QUAD MOBILE-0/1: MODULE ID = GC864-QUAD [29.870] MOBILE-0/1: SIM READY [48.570] Interface MOBILE-0/1, changed state to UP

удалить закрыть спам изменить тег редактировать

спросил 2013-06-15 13:10:10 +0400

qbq Gravatar qbq
1 1

Comments

обнуляйте конфиг - и все по новой настраивайте - в гугле 10 примеров. Хоть бы sh run привели ради приличия, а то телепаты .... в общем все телепаты.

awsswa ( 2013-06-15 15:16:33 +0400 )редактировать

в теме написан шлюз 1001, в консоли - 1002.

Master135 ( 2013-06-15 18:16:05 +0400 )редактировать

1 Ответ

0

erase startup-config
reboot

ссылка удалить спам редактировать

ответил 2013-06-15 18:21:41 +0400

Master135 Gravatar Master135
431 1 3 10

Ваш ответ

Please start posting your answer anonymously - your answer will be saved within the current session and published after you log in or create a new account. Please try to give a substantial answer, for discussions, please use comments and please do remember to vote (after you log in)!
[скрыть предварительный просмотр]

Закладки и информация

Добавить закладку

подписаться на rss ленту новостей

Статистика

Задан: 2013-06-15 13:10:10 +0400

Просмотрен: 559 раз

Обновлен: Jun 15 '13

Похожие вопросы:

Проект компании "АТС Дизайн"
Asterisk® и Digium® являются зарегистрированными торговыми марками компании Digium, Inc., США.
IP АТС Asterisk распространяется под лицензией GNU GPL.