История изменений [назад]

Судя по логу iaxmodem не отвечает на вызов. Проверьте настройку RingsBeforeAnswer.

Вот пример рабочего config.ttyIAX0:

CountryCode:            7
AreaCode:               495
FAXNumber:              +7.111.222.3344
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Horse21"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200
ModemType:              Class1          # use this to supply a hint
Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response
ModemResetCmds:         AT+VCID=1       # enables CallID display
PagerTTYParity:         none
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
CallIDPattern:          "NDID="

Судя по логу iaxmodem не отвечает успевает ответить на вызов. Проверьте настройку RingsBeforeAnswer.RingsBeforeAnswer. Или увеличьте таймаут в Dial().

Вот пример рабочего config.ttyIAX0:

CountryCode:            7
AreaCode:               495
FAXNumber:              +7.111.222.3344
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "Horse21"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200
ModemType:              Class1          # use this to supply a hint
Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response
ModemResetCmds:         AT+VCID=1       # enables CallID display
PagerTTYParity:         none
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
CallIDPattern:          "NDID="