Разрулить звонки с разных номеров

Есть Е1 поток на нем вести 2 номера. Диалплан для входящих звонков типа exten => s,1,... нужно чтобы с одного входящего номера звонок переходил сразу на определенный внутренний номер но как это сделать чет не соображу. Пните в нужном нарпавлении

debug pri span 1

< Protocol Discriminator: Q.931 (8) len=47 < TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent from originator) < Message Type: SETUP (5) < [a1] < Sending Complete (len= 1) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a9 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 Type: CPE] < [28 0b 38 39 32 35 30 33 34 37 32 35 32] < Display (len=11) [ 892503472XX ] < [6c 0d 01 80 38 39 32 35 30 33 34 37 32 35 32] < Calling Number (len=15) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number not screened (0) '892503472XX' ] < [70 01 81] < Called Number (len= 3) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '' ] -- Making new call for cref 252 Received message for call 0x1da3f470 on 0x2aaad012cb70 TEI/SAPI 0/0, call->pri is 0x2aaad012cb70 TEI/SAPI 0/0 -- Processing Q.931 Call Setup -- Processing IE 161 (cs0, Sending Complete) -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 40 (cs0, Display) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:6871 post_handle_q931_message: Call 252 enters state 6 (Call Present). Hold state: Idle -- Going to extension s|1 because of Complete received q931.c:4524 q931_call_proceeding: Call 252 enters state 9 (Incoming Call Proceeding). Hold state: Idle > DL-DATA request > Protocol Discriminator: Q.931 (8) len=10 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: CALL PROCEEDING (2) TEI=0 Transmitting N(S)=102, window is open V(A)=102 K=7 > Protocol Discriminator: Q.931 (8) len=10 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: CALL PROCEEDING (2) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 Type: CPE] -- Accepting call from '892503472XX' to 's' on channel 0/1, span 1 -- Executing [s@menu:1] Answer("DAHDI/1-1", "") in new stack q931.c:4683 q931_connect: Call 252 enters state 8 (Connect Request). Hold state: Idle > DL-DATA request > Protocol Discriminator: Q.931 (8) len=14 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: CONNECT (7) TEI=0 Transmitting N(S)=103, window is open V(A)=102 K=7 > Protocol Discriminator: Q.931 (8) len=14 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: CONNECT (7) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 Type: CPE] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ] -- Executing [s@menu:2] NoOp("DAHDI/1-1", "Calling from 892503472XX to s") in new stack -- Executing [s@menu:3] Set("DAHDI/1-1", "choice_counter=1") in new stack -- Executing [s@menu:4] Wait("DAHDI/1-1", "1) (Ожидание") in new stack < Protocol Discriminator: Q.931 (8) len=5 < TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent from originator) < Message Type: CONNECT ACKNOWLEDGE (15) Received message for call 0x1da3f470 on 0x2aaad012cb70 TEI/SAPI 0/0, call->pri is 0x2aaad012cb70 TEI/SAPI 0/0 q931.c:7024 post_handle_q931_message: Call 252 enters state 10 (Active). Hold state: Idle -- Executing [s@menu:5] Set("DAHDI/1-1", "TIMEOUT(response)=4") in new stack -- Response timeout set to 4.000 -- Executing [s@menu:6] Set("DAHDI/1-1", "TIMEOUT(digit)=4") in new stack -- Digit timeout set to 4.000 -- Executing [s@menu:7] BackGround("DAHDI/1-1", "zdravstujte") in new stack -- <DAHDI/1-1> Playing 'zdravstujte.slin' (language 'ru') -- Executing [s@menu:8] BackGround("DAHDI/1-1", "01") in new stack -- <DAHDI/1-1> Playing '01.slin' (language 'ru') < Protocol Discriminator: Q.931 (8) len=9 < TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent from originator) < Message Type: DISCONNECT (69) < [08 02 82 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] Received message for call 0x1da3f470 on 0x2aaad012cb70 TEI/SAPI 0/0, call->pri is 0x2aaad012cb70 TEI/SAPI 0/0 -- Processing IE 8 (cs0, Cause) -- Found active call: 0x1da3f470 cref:252 q931.c:7201 post_handle_q931_message: Call 252 enters state 12 (Disconnect Indication). Hold state: Idle -- Channel 0/1, span 1 got hangup request, cause 16 == Spawn extension (menu, s, 8) exited non-zero on 'DAHDI/1-1' q931_hangup: other hangup NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request, hold-state Idle q931.c:4721 q931_release: Call 252 enters state 19 (Release Request). Hold state: Idle > DL-DATA request > Protocol Discriminator: Q.931 (8) len=9 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: RELEASE (77) TEI=0 Transmitting N(S)=104, window is open V(A)=104 K=7 > Protocol Discriminator: Q.931 (8) len=9 > TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent to originator) > Message Type: RELEASE (77) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Hungup 'DAHDI/1-1' < Protocol Discriminator: Q.931 (8) len=5 < TEI=0 Call Ref: len= 2 (reference 252/0xFC) (Sent from originator) < Message Type: RELEASE COMPLETE (90) Received message for call 0x1da3f470 on 0x2aaad012cb70 TEI/SAPI 0/0, call->pri is 0x2aaad012cb70 TEI/SAPI 0/0 q931.c:7083 post_handle_q931_message: Call 252 enters state 0 (Null). Hold state: Idle q931_hangup: other hangup