Пожалуйста, войдите здесь. Часто задаваемые вопросы О нас
Задайте Ваш вопрос

История изменений [назад]

нажмите, чтобы скрыть/показать версии 1
изначальная версия
редактировать

спросил 2015-02-10 22:29:32 +0400

Чистый Gravatar Чистый

Настройка OpenVox D130P/D130E

Добрый день, есть плата OpenVox D130 и чистый aster, не могу поднять плату, настроил следующее: /etc/dahdi/system.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

dahdi_scan

[1]
active=yes
alarms=RED/LFA
description=D115 (E1/T1) Card 0 Span 1
name=D115/0/1
manufacturer=OpenVox
devicetype=OpenVox D130P/D130E Single-port E1/T1 c
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4

dahdi show channels

aster*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked    State      Description                     
 pseudo            default                    default                         In Service                                 
      1            from-trunk                 default                         In Service                                 
      2            from-trunk                 default                         In Service                                 
      3            from-trunk                 default                         In Service                                 
      4            from-trunk                 default                         In Service

pro show span

PRI span 1/0: In Alarm, Down, Active

dahdi show status

Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
D115 (E1/T1) Card 0 Span 1               RED     0      0      0      CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)

Не могу понять почему не поднимается канал, вот что в логах:

Feb 10 19:00:16 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:00:47 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:04:17 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3/CRC4
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source

Настройка OpenVox D130P/D130E

Добрый день, есть плата OpenVox D130 и чистый aster, не могу поднять плату, настроил следующее: /etc/dahdi/system.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

dahdi_scan

[1]
active=yes
alarms=RED/LFA
description=D115 (E1/T1) Card 0 Span 1
name=D115/0/1
manufacturer=OpenVox
devicetype=OpenVox D130P/D130E Single-port E1/T1 c
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4

dahdi show channels

aster*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked    State      Description                     
 pseudo            default                    default                         In Service                                 
      1            from-trunk                 default                         In Service                                 
      2            from-trunk                 default                         In Service                                 
      3            from-trunk                 default                         In Service                                 
      4            from-trunk                 default                         In Service

pro pri show span

PRI span 1/0: In Alarm, Down, Active

dahdi show status

Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
D115 (E1/T1) Card 0 Span 1               RED     0      0      0      CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)

Не могу понять почему не поднимается канал, вот что в логах:

Feb 10 19:00:16 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:00:47 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:04:17 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3/CRC4
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source

Настройка OpenVox D130P/D130E

Добрый день, есть плата OpenVox D130 и чистый aster, не могу поднять плату, настроил следующее: /etc/dahdi/system.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

dahdi_scan

[1]
active=yes
alarms=RED/LFA
description=D115 (E1/T1) Card 0 Span 1
name=D115/0/1
manufacturer=OpenVox
devicetype=OpenVox D130P/D130E Single-port E1/T1 c
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4

dahdi show channels

aster*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked    State      Description                     
 pseudo            default                    default                         In Service                                 
      1            from-trunk                 default                         In Service                                 
      2            from-trunk                 default                         In Service                                 
      3            from-trunk                 default                         In Service                                 
      4            from-trunk                 default                         In Service

pri show span

PRI span 1/0: In Alarm, Down, Active

dahdi show status

Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
D115 (E1/T1) Card 0 Span 1               RED     0      0      0      CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)

Не могу понять почему не поднимается канал, вот что в логах:

Feb 10 19:00:16 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:00:47 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:04:17 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3/CRC4
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source

логи pri set debug on span 1

Enabled debugging on span 1
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)

Настройка OpenVox D130P/D130E

Добрый день, есть плата OpenVox D130 и чистый aster, не могу поднять плату, настроил следующее: /etc/dahdi/system.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

dahdi_scan

[1]
active=yes
alarms=RED/LFA
description=D115 (E1/T1) Card 0 Span 1
name=D115/0/1
manufacturer=OpenVox
devicetype=OpenVox D130P/D130E Single-port E1/T1 c
location=Board ID Switch 0
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4

dahdi show channels

aster*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked    State      Description                     
 pseudo            default                    default                         In Service                                 
      1            from-trunk                 default                         In Service                                 
      2            from-trunk                 default                         In Service                                 
      3            from-trunk                 default                         In Service                                 
      4            from-trunk                 default                         In Service

pri show span

PRI span 1/0: In Alarm, Down, Active

dahdi show status

Description                              Alarms  IRQ    bpviol CRC    Fra Codi Options  LBO
D115 (E1/T1) Card 0 Span 1               RED     0      0      0      CCS HDB3 CRC4     0 db (CSU)/0-133 feet (DSX-1)

Не могу понять почему не поднимается канал, вот что в логах:

Feb 10 19:00:16 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:00:47 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:01:03 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source
Feb 10 19:04:17 aster kernel: dahdi_devices pci:0000:02:00.0: local span 1 is already assigned span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: opvxd115: Span 1 configured for CCS/HDB3/CRC4
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: All spans in alarm : No validspan to source RCLK from
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: RCLK source set to span 1
Feb 10 19:04:17 aster kernel: opvxd115 0000:02:00.0: SPAN 1: Primary Sync Source

логи pri set debug on span 1

Enabled debugging on span 1
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
PRI Span: 1 Changing from state 5(Awaiting establishment) to 4(TEI assigned)
PRI Span: 1 TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)

cat /etc/asterisk/chan_dahdi.conf

[channels]
group=1
context=from-trunk
switchtype = euroisdn
signalling = pri_cpe
callerid=asreceived
usecallerid=yes
hidecallerid=no
callwaiting=yes
overlapdial=yes
pridialplan=unknown
usecallingpres=yes
callwaitingcallerid=yes
rxgain=0.0
txgain=0.0
threewaycalling=yes
echocancel=yes
echocancelwhenbridged=yes
faxdetect=both
faxbuffers=>8,full
channel => 1-15,17-31
О проекте | Часто задаваемые вопросы | политика конфиденциальности | оставить отзыв

Проект компании "АТС Дизайн"
Asterisk® и Digium® являются зарегистрированными торговыми марками компании Digium, Inc., США.
IP АТС Asterisk распространяется под лицензией GNU GPL.