История изменений [назад]

Добрый день. Есть астериск 11.2.1, стоит за НАТ, работает без нариканий. В офисе стоят телефоны Thomson TB-30, которые звонят через астериск. Проблема относится к звонкам вне и внутри офиса. Я набираю номер ххх, на другом конце провода поднимают трубку, однако когда там трубку уже подняли у меня ещё идут гудки, таким образом, пока гудки у меня не пройдут на той стороне не услышат меня. Итого выходит, что у меня время разговора, например, 30 сек, у второй стороны 40 сек, а разницу в 10 секунд на другом конце провода была тишина. Куда копать? Конфиг астериска:

[general]
jbenable=yes
jbforce=yes
jbimpl = fixed
jbmaxsize = 200
#include sip_general_custom.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf
#include sip_custom_post.conf

asterisk.conf
[directories](!)
astetcdir => /etc/asterisk
astmoddir => /usr/lib/asterisk/modules
astvarlibdir => /var/lib/asterisk
astdbdir => /var/lib/asterisk
astkeydir => /var/lib/asterisk
astdatadir => /var/lib/asterisk
astagidir => /var/lib/asterisk/agi-bin
astspooldir => /var/spool/asterisk
astrundir => /var/run/asterisk
astlogdir => /var/log/asterisk
astsbindir => /usr/sbin

[options]
;verbose = 3
;debug = 3
;alwaysfork = yes               ; Same as -F at startup.
;nofork = yes                   ; Same as -f at startup.
;quiet = yes                    ; Same as -q at startup.
;timestamp = yes                ; Same as -T at startup.
;execincludes = yes             ; Support #exec in config files.
;console = yes                  ; Run as console (same as -c at startup).
;highpriority = yes             ; Run realtime priority (same as -p at
                                ; startup).
;initcrypto = yes               ; Initialize crypto keys (same as -i at
                                ; startup).
;nocolor = yes                  ; Disable console colors.
;dontwarn = yes                 ; Disable some warnings.
;dumpcore = yes                 ; Dump core on crash (same as -g at startup).
;languageprefix = yes           ; Use the new sound prefix path syntax.
internal_timing = yes
;systemname = my_system_name    ; Prefix uniqueid with a system name for
                                ; Global uniqueness issues.
;autosystemname = yes           ; Automatically set systemname to hostname,
                                ; uses 'localhost' on failure, or systemname if
                                ; set.
;mindtmfduration = 80           ; Set minimum DTMF duration in ms (default 80 ms)
                                ; If we get shorter DTMF messages, these will be
                                ; changed to the minimum duration
;maxcalls = 10                  ; Maximum amount of calls allowed.
;maxload = 0.9                  ; Asterisk stops accepting new calls if the
                                ; load average exceed this limit.
;maxfiles = 1000                ; Maximum amount of openfiles.
;minmemfree = 1                 ; In MBs, Asterisk stops accepting new calls if
                                ; the amount of free memory falls below this
                                ; watermark.
;cache_record_files = yes       ; Cache recorded sound files to another
                                ; directory during recording.
;record_cache_dir = /tmp        ; Specify cache directory (used in conjunction
                                ; with cache_record_files).
;transmit_silence = yes         ; Transmit silence while a channel is in a
                                ; waiting state, a recording only state, or
                                ; when DTMF is being generated.  Note that the
                                ; silence internally is generated in raw signed
                                ; linear format. This means that it must be
                                ; transcoded into the native format of the
                                ; channel before it can be sent to the device.
                                ; It is for this reason that this is optional,
                                ; as it may result in requiring a temporary
                                ; codec translation path for a channel that may
                                ; not otherwise require one.
;transcode_via_sln = yes        ; Build transcode paths via SLINEAR, instead of
                                ; directly.
;runuser = asterisk             ; The user to run as.
;rungroup = asterisk            ; The group to run as.
;lightbackground = yes          ; If your terminal is set for a light-colored
                                ; background.
;forceblackbackground = yes     ; Force the background of the terminal to be
                                ; black, in order for terminal colors to show
                                ; up properly.
;defaultlanguage = en           ; Default language
documentation_language = en_US  ; Set the language you want documentation
                                ; displayed in. Value is in the same format as
                                ; locale names.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;lockconfdir = no               ; Protect the directory containing the
                                ; configuration files (/etc/asterisk) with a
                                ; lock.
;stdexten = gosub               ; How to invoke the extensions.conf stdexten.
                                ; macro - Invoke the stdexten using a macro as
                                ;         done by legacy Asterisk versions.
                                ; gosub - Invoke the stdexten using a gosub as
                                ;         documented in extensions.conf.sample.
                                ; Default gosub.

; Changing the following lines may compromise your security.
;[files]
;astctlpermissions = 0660
;astctlowner = root
;astctlgroup = apache
;astctl = asterisk.ctl

[compat]
pbx_realtime=1.6
res_agi=1.6
app_set=1.6

Добрый день. Есть астериск 11.2.1, стоит за НАТ, работает без нариканий. нареканий. В офисе стоят телефоны Thomson TB-30, которые звонят через астериск. Проблема относится к звонкам вне и внутри офиса. Я набираю номер ххх, на другом конце провода поднимают трубку, однако когда там трубку уже подняли у меня ещё идут гудки, таким образом, пока гудки у меня не пройдут на той стороне не услышат меня. Итого выходит, что у меня время разговора, например, 30 сек, у второй стороны 40 сек, а разницу в 10 секунд на другом конце провода была тишина. Куда копать? Конфиг астериска:

[general]
jbenable=yes
jbforce=yes
jbimpl = fixed
jbmaxsize = 200
#include sip_general_custom.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf
#include sip_custom_post.conf

asterisk.conf
[directories](!)
astetcdir => /etc/asterisk
astmoddir => /usr/lib/asterisk/modules
astvarlibdir => /var/lib/asterisk
astdbdir => /var/lib/asterisk
astkeydir => /var/lib/asterisk
astdatadir => /var/lib/asterisk
astagidir => /var/lib/asterisk/agi-bin
astspooldir => /var/spool/asterisk
astrundir => /var/run/asterisk
astlogdir => /var/log/asterisk
astsbindir => /usr/sbin

[options]
;verbose = 3
;debug = 3
;alwaysfork = yes               ; Same as -F at startup.
;nofork = yes                   ; Same as -f at startup.
;quiet = yes                    ; Same as -q at startup.
;timestamp = yes                ; Same as -T at startup.
;execincludes = yes             ; Support #exec in config files.
;console = yes                  ; Run as console (same as -c at startup).
;highpriority = yes             ; Run realtime priority (same as -p at
                                ; startup).
;initcrypto = yes               ; Initialize crypto keys (same as -i at
                                ; startup).
;nocolor = yes                  ; Disable console colors.
;dontwarn = yes                 ; Disable some warnings.
;dumpcore = yes                 ; Dump core on crash (same as -g at startup).
;languageprefix = yes           ; Use the new sound prefix path syntax.
internal_timing = yes
;systemname = my_system_name    ; Prefix uniqueid with a system name for
                                ; Global uniqueness issues.
;autosystemname = yes           ; Automatically set systemname to hostname,
                                ; uses 'localhost' on failure, or systemname if
                                ; set.
;mindtmfduration = 80           ; Set minimum DTMF duration in ms (default 80 ms)
                                ; If we get shorter DTMF messages, these will be
                                ; changed to the minimum duration
;maxcalls = 10                  ; Maximum amount of calls allowed.
;maxload = 0.9                  ; Asterisk stops accepting new calls if the
                                ; load average exceed this limit.
;maxfiles = 1000                ; Maximum amount of openfiles.
;minmemfree = 1                 ; In MBs, Asterisk stops accepting new calls if
                                ; the amount of free memory falls below this
                                ; watermark.
;cache_record_files = yes       ; Cache recorded sound files to another
                                ; directory during recording.
;record_cache_dir = /tmp        ; Specify cache directory (used in conjunction
                                ; with cache_record_files).
;transmit_silence = yes         ; Transmit silence while a channel is in a
                                ; waiting state, a recording only state, or
                                ; when DTMF is being generated.  Note that the
                                ; silence internally is generated in raw signed
                                ; linear format. This means that it must be
                                ; transcoded into the native format of the
                                ; channel before it can be sent to the device.
                                ; It is for this reason that this is optional,
                                ; as it may result in requiring a temporary
                                ; codec translation path for a channel that may
                                ; not otherwise require one.
;transcode_via_sln = yes        ; Build transcode paths via SLINEAR, instead of
                                ; directly.
;runuser = asterisk             ; The user to run as.
;rungroup = asterisk            ; The group to run as.
;lightbackground = yes          ; If your terminal is set for a light-colored
                                ; background.
;forceblackbackground = yes     ; Force the background of the terminal to be
                                ; black, in order for terminal colors to show
                                ; up properly.
;defaultlanguage = en           ; Default language
documentation_language = en_US  ; Set the language you want documentation
                                ; displayed in. Value is in the same format as
                                ; locale names.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;lockconfdir = no               ; Protect the directory containing the
                                ; configuration files (/etc/asterisk) with a
                                ; lock.
;stdexten = gosub               ; How to invoke the extensions.conf stdexten.
                                ; macro - Invoke the stdexten using a macro as
                                ;         done by legacy Asterisk versions.
                                ; gosub - Invoke the stdexten using a gosub as
                                ;         documented in extensions.conf.sample.
                                ; Default gosub.

; Changing the following lines may compromise your security.
;[files]
;astctlpermissions = 0660
;astctlowner = root
;astctlgroup = apache
;astctl = asterisk.ctl

[compat]
pbx_realtime=1.6
res_agi=1.6
app_set=1.6

Добрый день. Есть астериск 11.2.1, стоит за НАТ, работает без нареканий. В офисе стоят телефоны Thomson TB-30, которые звонят через астериск. Проблема относится к звонкам вне и внутри офиса. Я набираю номер ххх, на другом конце провода поднимают трубку, однако когда там трубку уже подняли у меня ещё идут гудки, таким образом, пока гудки у меня не пройдут на той стороне не услышат меня. Итого выходит, что у меня время разговора, например, 30 сек, у второй стороны 40 сек, а разницу в 10 секунд на другом конце провода была тишина.

Куда копать? копать?

Конфиг астериска:

sip.conf

[general]
jbenable=yes
jbforce=yes
jbimpl = fixed
jbmaxsize = 200
#include sip_general_custom.conf
#include sip_registrations_custom.conf
#include sip_registrations.conf
#include sip_custom.conf
#include sip_additional.conf
#include sip_custom_post.conf

asterisk.conf

asterisk.conf

[directories](!)
astetcdir => /etc/asterisk
astmoddir => /usr/lib/asterisk/modules
astvarlibdir => /var/lib/asterisk
astdbdir => /var/lib/asterisk
astkeydir => /var/lib/asterisk
astdatadir => /var/lib/asterisk
astagidir => /var/lib/asterisk/agi-bin
astspooldir => /var/spool/asterisk
astrundir => /var/run/asterisk
astlogdir => /var/log/asterisk
astsbindir => /usr/sbin

[options]
;verbose = 3
;debug = 3
;alwaysfork = yes               ; Same as -F at startup.
;nofork = yes                   ; Same as -f at startup.
;quiet = yes                    ; Same as -q at startup.
;timestamp = yes                ; Same as -T at startup.
;execincludes = yes             ; Support #exec in config files.
;console = yes                  ; Run as console (same as -c at startup).
;highpriority = yes             ; Run realtime priority (same as -p at
                                ; startup).
;initcrypto = yes               ; Initialize crypto keys (same as -i at
                                ; startup).
;nocolor = yes                  ; Disable console colors.
;dontwarn = yes                 ; Disable some warnings.
;dumpcore = yes                 ; Dump core on crash (same as -g at startup).
;languageprefix = yes           ; Use the new sound prefix path syntax.
internal_timing = yes
;systemname = my_system_name    ; Prefix uniqueid with a system name for
                                ; Global uniqueness issues.
;autosystemname = yes           ; Automatically set systemname to hostname,
                                ; uses 'localhost' on failure, or systemname if
                                ; set.
;mindtmfduration = 80           ; Set minimum DTMF duration in ms (default 80 ms)
                                ; If we get shorter DTMF messages, these will be
                                ; changed to the minimum duration
;maxcalls = 10                  ; Maximum amount of calls allowed.
;maxload = 0.9                  ; Asterisk stops accepting new calls if the
                                ; load average exceed this limit.
;maxfiles = 1000                ; Maximum amount of openfiles.
;minmemfree = 1                 ; In MBs, Asterisk stops accepting new calls if
                                ; the amount of free memory falls below this
                                ; watermark.
;cache_record_files = yes       ; Cache recorded sound files to another
                                ; directory during recording.
;record_cache_dir = /tmp        ; Specify cache directory (used in conjunction
                                ; with cache_record_files).
;transmit_silence = yes         ; Transmit silence while a channel is in a
                                ; waiting state, a recording only state, or
                                ; when DTMF is being generated.  Note that the
                                ; silence internally is generated in raw signed
                                ; linear format. This means that it must be
                                ; transcoded into the native format of the
                                ; channel before it can be sent to the device.
                                ; It is for this reason that this is optional,
                                ; as it may result in requiring a temporary
                                ; codec translation path for a channel that may
                                ; not otherwise require one.
;transcode_via_sln = yes        ; Build transcode paths via SLINEAR, instead of
                                ; directly.
;runuser = asterisk             ; The user to run as.
;rungroup = asterisk            ; The group to run as.
;lightbackground = yes          ; If your terminal is set for a light-colored
                                ; background.
;forceblackbackground = yes     ; Force the background of the terminal to be
                                ; black, in order for terminal colors to show
                                ; up properly.
;defaultlanguage = en           ; Default language
documentation_language = en_US  ; Set the language you want documentation
                                ; displayed in. Value is in the same format as
                                ; locale names.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;hideconnect = yes              ; Hide messages displayed when a remote console
                                ; connects and disconnects.
;lockconfdir = no               ; Protect the directory containing the
                                ; configuration files (/etc/asterisk) with a
                                ; lock.
;stdexten = gosub               ; How to invoke the extensions.conf stdexten.
                                ; macro - Invoke the stdexten using a macro as
                                ;         done by legacy Asterisk versions.
                                ; gosub - Invoke the stdexten using a gosub as
                                ;         documented in extensions.conf.sample.
                                ; Default gosub.

; Changing the following lines may compromise your security.
;[files]
;astctlpermissions = 0660
;astctlowner = root
;astctlgroup = apache
;astctl = asterisk.ctl

[compat]
pbx_realtime=1.6
res_agi=1.6
app_set=1.6