сюда трудно картинки забрасывать, а словами описывать - неблагодарно...


Ах, да!
Это в 2.5 версии, у Вас наверное 2.4,

там Extension Options
поле Direct DID

через Direct DID - не получаеться :(
Пробовал добавлять DID чз Incoming Route - тоже не работает почему-то.
Я наверное указал не правильные параметры Trunk.
Давайте по порядку - с самого примитивного.

В меню Trunks поле Outgoing Settings:

[ivc]
host=xxx.xxx.xxx.xxx
type=friend
qualify=yes
trunk=yes
context=from-internal
username=user1 - я так понимаю имя польз на удаленном сервере.
secret=secret1 - пароль на удаленном сервере.

(напомню исходящие работают)


Incoming Settings:

username=user2 - что сюда писать, какого юзера ?
secret=secret2 - пароль мой или с севера другой стороны ?
type=user
context=from-internal - какой конекст указать что бы звонки поступали на внутренние номера по заданному шаблону _6XXX.

В Register String - что-то писать ?


если пишет что зарегестрирован - то звонки уже будут ходить в обе стороны ?
iax2 show peers
Name/Username Host Mask Port Status
ivc/kiro xxx.xxx.xxx.xxx (S) 255.255.255.255 4569 (T) OK (21 ms)

Вам нужно по порядку, тут наверное только SolarW сможет так.

Я бы помог - но я если честно с первого поста не понял какая нумерация на обоих астерисках...
А из предпоследнего поста не понял зачем приходящие с другой станции звонки совать в from-internal а не в from-trunk

Вилимо на обоих астерисках трёхзначный и потому схожий диал план.
Чтобы используя одну цифру префикса 6, которая отсекается сразу при звонке с первого сервера допустим, попадать в диал план внутренних номеров второго сервера.
Как бы
exten _6XXX,1,Dial(IAX2/server2/${EXTEN:1})

Давайте сначала рассмотрим как правильно два трикса связать между собой по IAX2, а вторым этапом уже будем решать вопрос с подменой номеров (что-то мне подсказывает что это несложно будет)

Итак, как связываю триксы я (может кто-то ошибки узрит)
Дано два трикса:
- trix1 (ip xxx.xxx.xxx.xxx)
- trix2 (ip yyy.yyy.yyy.yyy)

Создадим IAX транк на trix1
Trunk Name: ToTrix2
Peer Details:

host=yyy.yyy.yyy.yyy
username=trix1
secret=trix1
type=peer
qualify=yes
trunk=yes

User Context: trix2
User Details:

secret=trix2
type=user
context=from-trunk

На втором триксе создадим аналогичную конструкцию:

Trunk Name: ToTrix1
Peer Details:

host=xxx.xxx.xxx.xxx
username=trix2
secret=trix2
type=peer
qualify=yes
trunk=yes

User Context: trix1
User Details:

secret=trix1
type=user
context=from-trunk

Можно по вкусу кодеки добавить

Ну так тогда обычный Outbound Routes по префиксу
В поле Dial Paterns с одной стороны указать 6|. а с другой 7|.
А чтобы можно было перезванивать - на принимающей стороне подменять CID.
Если мы все верно поняли - могу так же детально расписать как и CID менять :-)
Тогда не поломается возможность звонить в город через поток со своим CID'ом

В поле Dial Paterns с одной стороны указать 6|XXX а с другой 7|X. если быть точным.
Так вот не на принимающей стороне подменять CID, а на отправляющей. И чтобы в город был городской индивидуальный CID - он должен быть забит в поле прямого DID у экстеншн, а в Outbound callerID - "Вася" <6123> чтобы со второго сервера ему могли отзвонить по 6123.

На колу мочало,
Читай ветку сначала.

Extensions setup - поле DID занято
http://i.piccy.info/i4/7d/97/5a841fd111b9e409e48fd2735ae0.jpeg

Настройки транка
http://i.piccy.info/i4/a0/f4/54bf2df1fc2276b1483f65a41ec0.jpeg

Inbound Routes - тут я перенаправляю входящий 6029 на внутр 357229
http://i.piccy.info/i4/67/7e/91a4360cdaaf7305b3094dbaca4e.jpeg

Лог входящего звонка с транка на номер 6029:

[Aug 7 10:03:24] VERBOSE[3460] logger.c: -- Accepting AUTHENTICATED call from xxx.xxx.xxx.xxx:
> requested format = ulaw,
> requested prefs = (ulaw),
> actual format = ulaw,
> host prefs = (ulaw|alaw|gsm),
> priority = mine
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [6029@from-internal:1] Macro("IAX2/ivcdonbass-2", "user-callerid|SKIPTTL|") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:1] NoOp("IAX2/ivcdonbass-2", "user-callerid: Tech. Director Donetsk 7113") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:2] Set("IAX2/ivcdonbass-2", "AMPUSER=7113") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:3] GotoIf("IAX2/ivcdonbass-2", "0?report") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:4] ExecIf("IAX2/ivcdonbass-2", "1|Set|REALCALLERIDNUM=7113") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: ExecIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:5] NoOp("IAX2/ivcdonbass-2", "REALCALLERIDNUM is 7113") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: DEVICE/7113/user not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:6] Set("IAX2/ivcdonbass-2", "AMPUSER=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: AMPUSER//cidname not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:7] Set("IAX2/ivcdonbass-2", "AMPUSERCIDNAME=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:8] GotoIf("IAX2/ivcdonbass-2", "1?report") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-user-callerid,s,13)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:13] NoOp("IAX2/ivcdonbass-2", "TTL: ARG1: SKIPTTL") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:14] GotoIf("IAX2/ivcdonbass-2", "1?continue") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-user-callerid,s,23)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-user-callerid:23] NoOp("IAX2/ivcdonbass-2", "Using CallerID "Tech. Director Donetsk" <7113>") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [6029@from-internal:2] Set("IAX2/ivcdonbass-2", "_NODEST=") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [6029@from-internal:3] Macro("IAX2/ivcdonbass-2", "record-enable||OUT|") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("IAX2/ivcdonbass-2", "0?2:4") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-record-enable,s,4)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-record-enable:4] AGI("IAX2/ivcdonbass-2", "recordingcheck|20090807-100324|1249628604.24984") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
[Aug 7 10:03:24] VERBOSE[29227] logger.c: recordingcheck|20090807-100324|1249628604.24983: Inbound recording not enabled
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- AGI Script recordingcheck completed, returning 0
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: AGI
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-record-enable:5] NoOp("Zap/13-1", "No recording needed") in new stack
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: Macro
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-exten-vm:9] Macro("Zap/13-1", "dial||tr|357222") in new stack
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-dial:1] GotoIf("Zap/13-1", "0?dial") in new stack
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-dial:2] SetMusicOnHold("Zap/13-1", "none") in new stack
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: SetMusicOnHold
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-dial:3] AGI("Zap/13-1", "dialparties.agi") in new stack
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/dialparties.agi
[Aug 7 10:03:24] VERBOSE[29229] logger.c: recordingcheck|20090807-100324|1249628604.24984: No AMPUSER db entry for . Not recording
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- AGI Script recordingcheck completed, returning 0
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: AGI
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-record-enable:5] NoOp("IAX2/ivcdonbass-2", "No recording needed") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [6029@from-internal:4] Macro("IAX2/ivcdonbass-2", "dialout-trunk|1|6029||") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("IAX2/ivcdonbass-2", "DIAL_TRUNK=1") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: AMPUSER//pinless not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:2] ExecIf("IAX2/ivcdonbass-2", "0|Authenticate|") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: ExecIf
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: AMPUSER//pinless not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("IAX2/ivcdonbass-2", "0?disabletrunk|1") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("IAX2/ivcdonbass-2", "DIAL_NUMBER=6029") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("IAX2/ivcdonbass-2", "DIAL_TRUNK_OPTIONS=tr") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("IAX2/ivcdonbass-2", "GROUP()=OUT_1") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("IAX2/ivcdonbass-2", "0?nomax") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:8] GotoIf("IAX2/ivcdonbass-2", "0?chanfull") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("IAX2/ivcdonbass-2", "0?skipoutcid") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("IAX2/ivcdonbass-2", "DIAL_TRUNK_OPTIONS=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("IAX2/ivcdonbass-2", "outbound-callerid|1") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("IAX2/ivcdonbass-2", "0|SetCallerPres|") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: ExecIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:2] GotoIf("IAX2/ivcdonbass-2", "1?start") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-outbound-callerid,s,4)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:4] NoOp("IAX2/ivcdonbass-2", "REALCALLERIDNUM is 7113") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:5] GotoIf("IAX2/ivcdonbass-2", "1?normcid") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-outbound-callerid,s,10)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: AMPUSER/7113/outboundcid not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:10] Set("IAX2/ivcdonbass-2", "USEROUTCID=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] DEBUG[29229] func_db.c: DB: DEVICE/7113/emergency_cid not found in database.
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:11] Set("IAX2/ivcdonbass-2", "EMERGENCYCID=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:12] Set("IAX2/ivcdonbass-2", "TRUNKOUTCID=") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:13] GotoIf("IAX2/ivcdonbass-2", "1?trunkcid") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-outbound-callerid,s,17)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:17] GotoIf("IAX2/ivcdonbass-2", "1?usercid") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-outbound-callerid,s,19)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:19] GotoIf("IAX2/ivcdonbass-2", "1?report") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-outbound-callerid,s,23)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outbound-callerid:23] NoOp("IAX2/ivcdonbass-2", "CallerID set to "Tech. Director Donetsk" <7113>") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Macro
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:12] AGI("IAX2/ivcdonbass-2", "fixlocalprefix") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- AGI Script fixlocalprefix completed, returning 0
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: AGI
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("IAX2/ivcdonbass-2", "OUTNUM=6029") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("IAX2/ivcdonbass-2", "custom=ZAP/g0") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Set
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:15] GotoIf("IAX2/ivcdonbass-2", "1?gocall") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-dialout-trunk,s,17)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:17] Macro("IAX2/ivcdonbass-2", "dialout-trunk-predial-hook|") in new stack
[Aug 7 10:03:24] WARNING[29229] app_macro.c: Context 'macro-dialout-trunk-predial-hook' for macro 'dialout-trunk-predial-hook' lacks 's' extension, priority 1
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Macro
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("IAX2/ivcdonbass-2", "0?bypass|1") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:19] GotoIf("IAX2/ivcdonbass-2", "0?customtrunk") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:20] Dial("IAX2/ivcdonbass-2", "ZAP/g0/6029|300|") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Requested transfer capability: 0x00 - SPEECH
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Called g0/6029
[Aug 7 10:03:24] VERBOSE[29227] logger.c: dialparties.agi: Starting New Dialparties.agi
[Aug 7 10:03:24] VERBOSE[29233] logger.c: == Parsing '/etc/asterisk/manager.conf': [Aug 7 10:03:24] VERBOSE[29233] logger.c: Found
[Aug 7 10:03:24] VERBOSE[29233] logger.c: == Parsing '/etc/asterisk/manager_additional.conf': [Aug 7 10:03:24] VERBOSE[29233] logger.c: Found
[Aug 7 10:03:24] VERBOSE[29233] logger.c: == Parsing '/etc/asterisk/manager_custom.conf': [Aug 7 10:03:24] VERBOSE[29233] logger.c: Found
[Aug 7 10:03:24] VERBOSE[29233] logger.c: == Manager 'admin' logged on from 127.0.0.1
[Aug 7 10:03:24] VERBOSE[29227] logger.c: dialparties.agi: Caller ID name is '80522319903' number is '80522319903'
[Aug 7 10:03:24] VERBOSE[29227] logger.c: dialparties.agi: Methodology of ring is 'none'
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: Added extension 357222 to extension map
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: Extension 357222 cf is disabled
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: Extension 357222 do not disturb is disabled
[Aug 7 10:03:24] VERBOSE[29227] logger.c: dialparties.agi: Extension 357222 has ExtensionState: 0
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: Checking CW and CFB status for extension 357222
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: dbset CALLTRACE/357222 to 80522319903
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- dialparties.agi: Filtered ARG3: 357222
[Aug 7 10:03:24] VERBOSE[29233] logger.c: == Manager 'admin' logged off from 127.0.0.1
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- AGI Script dialparties.agi completed, returning 0
[Aug 7 10:03:24] DEBUG[29227] app_macro.c: Executed application: AGI
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Executing [s@macro-dial:7] Dial("Zap/13-1", "ZAP/g2/222||tr") in new stack
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Requested transfer capability: 0x10 - 3K1AUDIO
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Called g2/222
[Aug 7 10:03:24] DEBUG[3451] chan_zap.c: Queuing frame from PRI_EVENT_PROCEEDING on channel 0/1 span 3
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Zap/63-1 is proceeding passing it to Zap/13-1
[Aug 7 10:03:24] DEBUG[3451] chan_zap.c: Echo cancellation already on
[Aug 7 10:03:24] DEBUG[3449] chan_zap.c: Queuing frame from PRI_EVENT_PROCEEDING on channel 0/2 span 1
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Zap/2-1 is proceeding passing it to IAX2/ivcdonbass-2
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Zap/63-1 is ringing
[Aug 7 10:03:24] VERBOSE[29227] logger.c: -- Zap/63-1 answered Zap/13-1
[Aug 7 10:03:24] VERBOSE[3449] logger.c: -- Channel 0/2, span 1 got hangup request, cause 1
[Aug 7 10:03:24] WARNING[29229] app_dial.c: Unable to forward voice or dtmf
[Aug 7 10:03:24] DEBUG[29229] chan_zap.c: Set option AUDIO MODE, value: ON(1) on Zap/2-1
[Aug 7 10:03:24] DEBUG[29229] chan_zap.c: Not yet hungup... Calling hangup once with icause, and clearing call
[Aug 7 10:03:24] DEBUG[29229] chan_zap.c: Set option AUDIO MODE, value: OFF(0) on Zap/2-1
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Hungup 'Zap/2-1'
[Aug 7 10:03:24] VERBOSE[29229] logger.c: == Everyone is busy/congested at this time (1:0/0/1)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Dial
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-dialout-trunk:21] Goto("IAX2/ivcdonbass-2", "s-CHANUNAVAIL|1") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Goto
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("IAX2/ivcdonbass-2", "1?noreport") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("IAX2/ivcdonbass-2", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Noop
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [6029@from-internal:5] Macro("IAX2/ivcdonbass-2", "outisbusy|") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outisbusy:1] Playback("IAX2/ivcdonbass-2", "all-circuits-busy-now|noanswer") in new stack
[Aug 7 10:03:24] WARNING[29229] file.c: File all-circuits-busy-now does not exist in any format
[Aug 7 10:03:24] WARNING[29229] file.c: Unable to open all-circuits-busy-now (format 0x4 (ulaw)): No such file or directory
[Aug 7 10:03:24] WARNING[29229] app_playback.c: ast_streamfile failed on IAX2/ivcdonbass-2 for all-circuits-busy-now|noanswer
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Playback
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outisbusy:2] Playback("IAX2/ivcdonbass-2", "pls-try-call-later|noanswer") in new stack
[Aug 7 10:03:24] WARNING[29229] file.c: File pls-try-call-later does not exist in any format
[Aug 7 10:03:24] WARNING[29229] file.c: Unable to open pls-try-call-later (format 0x4 (ulaw)): No such file or directory
[Aug 7 10:03:24] WARNING[29229] app_playback.c: ast_streamfile failed on IAX2/ivcdonbass-2 for pls-try-call-later|noanswer
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: Playback
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-outisbusy:3] Macro("IAX2/ivcdonbass-2", "hangupcall") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("IAX2/ivcdonbass-2", "w") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: ResetCDR
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("IAX2/ivcdonbass-2", "") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: NoCDR
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("IAX2/ivcdonbass-2", "1?skiprg") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-hangupcall,s,6)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("IAX2/ivcdonbass-2", "1?skipblkvm") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-hangupcall,s,9)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("IAX2/ivcdonbass-2", "1?theend") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-hangupcall,s,11)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("IAX2/ivcdonbass-2", "") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/ivcdonbass-2' in macro 'hangupcall'
[Aug 7 10:03:24] VERBOSE[29229] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/ivcdonbass-2' in macro 'outisbusy'
[Aug 7 10:03:24] VERBOSE[29229] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'IAX2/ivcdonbass-2'
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Hungup 'IAX2/ivcdonbass-2'


Не получеться - в ответ занято :(

Уважаемый тех. директор Донецк!
Довожу до вашего сведения, что когда Вы сможете из кучи проблем выделять нужную для анализа, всё у Вас получится.
Пока что в этой куче много мусора, в частности - присутствует сразу несколько звонков -
Dial("IAX2/ivcdonbass-2", "ZAP/g0/6029|300|")
Dial("Zap/13-1", "ZAP/g2/222||tr")
одновременно, много бессмысленных для аналитики строк типа

[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("IAX2/ivcdonbass-2", "") in new stack
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: NoCDR
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("IAX2/ivcdonbass-2", "1?skiprg") in new stack
[Aug 7 10:03:24] VERBOSE[29229] logger.c: -- Goto (macro-hangupcall,s,6)
[Aug 7 10:03:24] DEBUG[29229] app_macro.c: Executed application: GotoIf

понять сходу какие каналы в группе g0 и g2, кто кому куда звонит - не представляется возможным.

Платный суппорт, спиртовой компресс, чай с малиной на ночь.