Re: * и cisco
вывод команд
show hardware
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IO3-M), Version 12.3(3), RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 19-Aug-03 16:32 by dchih
Image text-base: 0x80008098, data-base: 0x80D11A24
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
pbrouter1 uptime is 18 minutes
System returned to ROM by power-on
System image file is "flash:c2600-io3-mz.123-3.bin"
cisco 2611 (MPC860) processor (revision 0x203) with 27648K/5120K bytes of memory.
Processor board ID JAD050810X9 (1806607027)
M860 processor: part number 0, mask 49
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
6 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
2 Channelized E1/PRI port(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
show voice port вообще ругается что нет такой команды.
Я так понимаю что ничего не выйдет из затеи.
|