Re: Глючит TE110P T1/E1 Card
Резюмирую:
карта не глючит, все исходящие звонки через Е1 отбиваются разными кодами со стороны провайдера.
В основном по
-- Channel 0/28, span 1 got hangup request, cause 1
для справки:
Cause No. l - Unallocated (unassigned) number.
This cause indicates that the destination requested by the calling user cannot be reached because, although the number is in a valid format, it is not currently assigned (allocated).
What it usually means:
1. The SPIDS may be incorrectly entered in the router or the Telco switch, giving a SPID failure in the router logs.
2. The ISDN phone number being dialed by the router is invalid and the telco switch cannot locate the number to complete the call, as it is invalid.
3. On long distance calls, the call cannot be properly routed to its destination.
иногда, гораздо реже - по
-- Channel 0/28, span 1 got hangup request, cause 3
Cause No. 3 - No route to destination.
This cause indicates that the called party cannot be reached because the network through which the call has been routed does not serve the destination desired. This cause is supported on a network dependent basis.
Еще - редко по Cause No. 27 - destination out of order.
В целом, нет причин жаловаться на систему вообще. Если dmesg писал типа
dahdi: Idled echo canceller because of CED tx detected on channel 1
так записи просто накапливаются, там нет даты/времени, это нормальный autodetect oslec при факсовых тонах. |
