Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
mpg123: no process killed
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.

[May 21 12:50:48] ERROR[5447] asterisk.c: Asterisk has detected a problem with your Zaptel configuration and will shutdown for your protection. You have options:
1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support.
2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them.
3. If you need Zaptel services, you must correctly configure Zaptel.
...

/etc/init.d/zaptel stop
chkconfig --dell zaptel
/etc/init.d/asterisk start

./zaptel start
Loading zaptel framework: [ OK ]
Waiting for zap to come online...OK
Loading zaptel hardware modules: wct4xxp.
Running ztcfg: Notice: Configuration file is /etc/zaptel.conf
line 11: Coding must be one of 'ami', 'b8zs' or 'hdb3', not 'crc4'
line 18: Coding must be one of 'ami', 'b8zs' or 'hdb3', not 'crc4'

2 error(s) detected

line 11: span=3,2,0,ccs,crc4
line 18: span=6,2,0,ccs,crc4

modprobe -a zaptel
(команда выполняется, сообщений на экране никаких нет)

modprobe -a wct4xxp
(команда выполняется, сообщений на экране никаких нет)

./asterisk start
SETTING FILE PERMISSIONS Asterisk
Permissions Asterisk OK
Starting asterisk: [ OK ]

./asterisk status
asterisk dead but subsys locked

lsmod |sort
crc_ccitt 6337 1 zaptel
oslec 13720 1 zaptel
wct4xxp 400384 0
zaptel 200376 1 wct4xxp

switch:

zaptel/zapata.conf.

[trunkgroups]

[channels]
group=0
context=from-trunk
signalling=pri_cpe
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
switchtype = euroisdn
channel => 1-15,17-31

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=2
context=from-internal
#switchtype = euroisdn
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
switchtype = euroisdn
signalling = pri_net
channel => 32-46,48-62

# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RECOVERINGClockSource
span=3,2,0,ccs,crc4
#termtype: te
bchan=1-15,17-31
dchan=16
#hardhdlc=16

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" (MASTER) HDB3/CCS/CRC4
span=6,2,0,ccs,crc4
# termtype: te
bchan=32-46,48-62
dchan=47

# Global data

#loadzone = us
#defaultzone = us

loadzone = fi
defaultzone = fi

lsmod |sort
crc_ccitt 6337 1 zaptel
oslec 13720 1 zaptel
wct4xxp 400384 0
zaptel 200376 1 wct4xxp