Уважаемые очень бы хотелось узнать можно ли сделать так чтобы исходящие вызовы в город занимали
по порядку первый канал, и последующие по порядку с первого свободного.

Chan Extension Context Language MOH Interpret Blocked State
pseudo chan2 en default In Service
1 chan1 en default In Service
2 chan1 en default In Service
3 chan1 en default In Service
4 chan1 en default In Service
5 chan1 en default In Service
6 chan1 en default In Service
7 77777 chan1 en default In Service
8 chan1 en default In Service
9 chan1 en default In Service
10 73737 chan1 en default In Service
11 chan1 en default In Service
12 chan1 en default In Service
13 chan1 en default In Service
14 chan1 en default In Service
15 chan1 en default In Service
17 chan1 en default In Service
18 chan1 en default In Service
19 chan1 en default In Service
20 chan1 en default In Service
21 chan1 en default In Service
22 chan1 en default In Service
23 chan1 en default In Service
24 chan1 en default In Service
25 chan1 en default In Service
26 chan1 en default In Service
27 chan1 en default In Service
28 chan1 en default In Service
29 chan1 en default In Service
30 chan1 en default In Service
31 chan1 en default In Service
32 chan2 en default In Service
33 chan2 en default In Service
34 chan2 en default In Service
35 chan2 en default In Service
36 chan2 en default In Service
37 chan2 en default In Service
38 chan2 en default In Service
39 chan2 en default In Service
40 chan2 en default In Service
41 chan2 en default In Service
42 chan2 en default In Service
43 chan2 en default In Service
44 chan2 en default In Service
45 chan2 en default In Service
46 chan2 en default In Service
48 chan2 en default In Service
49 chan2 en default In Service
50 chan2 en default In Service
51 chan2 en default In Service
52 chan2 en default In Service
53 chan2 en default In Service
54 chan2 en default In Service
55 chan2 en default In Service
56 chan2 en default In Service
57 chan2 en default In Service
58 chan2 en default In Service
59 chan2 en default In Service
60 chan2 en default In Service
61 chan2 en default In Service
62 chan2 en default In Service

voip-info.org

...group: Allows you to group together a number of channels so that the Dial command will treat the group as a single channel. When Dial tries to make a call on a Zap group, the Zap channel module will use the first available (i.e. non-busy) channel in the group for the call...

coler12313, то что вы привели отражает входящие звонки, а не исходящие. все исходящие каналы занимаются поочереди.

Это ss7? Если ZAP, упс, DAHDI, то это группы:

Dialing a Group
In the Zap Channel Module's configuration file (zapata.conf), you can define groups of Zap channels that get treated as a single channel as far as the Dial command is concerned. You specify which of four methods the Zap channel module is to use to select a non-busy channel from the channel group by prefixing the group number with one of the letters g, G, r, or R:

* g: select the lowest-numbered non-busy Zap channel (aka. ascending sequential hunt group).
* G: select the highest-numbered non-busy Zap channel (aka. descending sequential hunt group).
* r: use a round-robin search, starting at the next highest channel than last time (aka. ascending rotary hunt group).
* R: use a round-robin search, starting at the next lowest channel than last time (aka. descending rotary hunt group).


The round-robin searches make the Zap channel module start looking for an available channel from a different channel number each time. For each channel group, the Zap channel module keeps track of the last round-robin start point, and this time starts checking availability from either the next (lowercase r)) or the previous uppercase R channel in the group. Which channel it actually finds available (if any) does not affect the starting point for the next round-robin search. Calls to the Dial command using ordinary (g or G) group selections do not affect future round-robin starting points either.

For example, if you have defined channel group 2 as containing Zap channels 1, 2, 5 and 8, and the last round-robin search for this group (group 2) began searching from channel 5, this is the order of searching that the Zap channel module will use for the four possible selection methods:

* Dial(Zap/g2...): Looks in order 1, 2, 5, 8
* Dial(Zap/G2...): Looks in order 8, 5, 2, 1
* Dial(Zap/r2...): Looks in order 8, 1, 2, 5
* Dial(Zap/R2...): Looks in order 2, 1, 8, 5