Подключение X100P с DAHDI

Решил попробовать импульсный набор поправить, подключил карту. Звонить не получается:

-- Executing [02*334290@default:1] Dial("SIP/102-0829a0c0", "DAHDI/1/3WWWWW3WWWWW4WWWWW2WWWWW9WWWWW0,,Tt") in new stack
[Nov 27 11:02:52] WARNING[21627]: app_dial.c:1450 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)

Вот вывод всяких разных команд:

server-voip*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo incoming ru default In Service
1 incoming ru default In Service

server-voip*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
DAHDI_DUMMY/1 (source: RTC) 1 UNCONFI 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
Generic Clone Board 1 OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)

server-voip:/etc/asterisk # dahdi_hardware
pci:0000:00:0c.0 wcfxo+ e159:0001 Wildcard X101P clone
pci:0000:00:0d.0 zaphfc- 1397:2bd0 HFC-S ISDN BRI card

server-voip:/etc/asterisk # dahdi_scan
[1]
active=yes
alarms=UNCONFIGURED
description=DAHDI_DUMMY/1 (source: RTC) 1
name=DAHDI_DUMMY/1
manufacturer=
devicetype=DAHDI Dummy Timing
location=
basechan=1
totchans=0
irq=0
type=analog
[2]
active=yes
alarms=OK
description=Generic Clone Board 1
name=WCFXO/0
manufacturer=Digium
devicetype=Generic Clone
location=PCI Bus 00 Slot 13
basechan=1
totchans=1
irq=12
type=analog
port=1,FXO