Приветствую.
Есть такая проблема.
Исходящие звонки по ZAPTEL проходят.
Выход в на PSTN осуществляется через ATC Panasonic.
При входящем звонке вот такая картина:

Asterisk 1.2.12.1, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Connected to Asterisk 1.2.12.1 currently running on zap (pid = 2184)
Verbosity is at least 11
Core debug is at least 1
-- Starting simple switch on 'Zap/2-1'
Oct 17 23:50:53 NOTICE[2940]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing Goto("Zap/2-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/2-1", "1") in new stack
Oct 17 23:50:54 WARNING[2940]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing BackGround("Zap/2-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 17 23:50:59 WARNING[2940]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Hungup 'Zap/2-1'
-- Starting simple switch on 'Zap/2-1'
Oct 17 23:51:08 NOTICE[2945]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing Goto("Zap/2-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/2-1", "1") in new stack
Oct 17 23:51:09 WARNING[2945]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing BackGround("Zap/2-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 17 23:51:14 WARNING[2945]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Hungup 'Zap/2-1'
zap*CLI>

При этом в трубке, к которой звоню - длинные гудки...
когда делаю reload,то возвращает вот что:
Oct 17 23:53:32 NOTICE[2985]: cdr.c:1192 do_reload: CDR simple logging enabled.
Oct 17 23:53:32 NOTICE[2985]: indications.c:505 ast_unregister_indication_country: Removed default indication country 'us'
Oct 17 23:53:32 WARNING[2985]: chan_zap.c:10874 setup_zap: Ignoring signalling

затем:
#ztcfg -vvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXS Loopstart (Default) (Slaves: 02)
Channel 03: FXS Loopstart (Default) (Slaves: 03)
Channel 04: FXS Loopstart (Default) (Slaves: 04)

4 channels configured.


/etc/zaptel.conf

fxsls=1-4
loadzone = us
defaultzone=us

/etc/asterisk/zapata.conf

бла-бла-бла
signalling=fxs_ls
бла-бла-бла

где вместо бла-бла-бла - правильный конфиг.

Пробовал разные tonezones в zaptel.conf - не помогло.
Пробовал гуглить на предмет "chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6" - одна ссылка http://www.asterisk-support.ru/forums/development/897807797625/view
Но решения там нет..
Прошу помочь разобраться. Заранее спасибо.

Приветствую. Есть такая проблема. Исходящие звонки по ZAPTEL проходят. Выход в на PSTN осуществляется через ATC Panasonic. При входящем звонке вот такая картина:
Asterisk 1.2.12.1, Copyright (C) 1999 - 2006 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'show license' for details.
=========================================================================
Connected to Asterisk 1.2.12.1 currently running on zap (pid = 2184)
Verbosity is at least 11
Core debug is at least 1
-- Starting simple switch on 'Zap/2-1'
Oct 17 23:50:53 NOTICE[2940]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing Goto("Zap/2-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/2-1", "1") in new stack
Oct 17 23:50:54 WARNING[2940]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing BackGround("Zap/2-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 17 23:50:59 WARNING[2940]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Hungup 'Zap/2-1'
-- Starting simple switch on 'Zap/2-1'
Oct 17 23:51:08 NOTICE[2945]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/2-1", "") in new stack
-- Executing Wait("Zap/2-1", "1") in new stack
-- Executing Goto("Zap/2-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/2-1", "1") in new stack
Oct 17 23:51:09 WARNING[2945]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Executing Answer("Zap/2-1", "") in new stack
-- Executing BackGround("Zap/2-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 17 23:51:14 WARNING[2945]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 2
-- Hungup 'Zap/2-1'
zap*CLI>

При этом в трубке, к которой звоню - длинные гудки... когда делаю reload,то возвращает вот что:

Oct 17 23:53:32 NOTICE[2985]: cdr.c:1192 do_reload: CDR simple logging enabled.
Oct 17 23:53:32 NOTICE[2985]: indications.c:505 ast_unregister_indication_country: Removed default indication country 'us'
Oct 17 23:53:32 WARNING[2985]: chan_zap.c:10874 setup_zap: Ignoring signalling

затем: #ztcfg -vvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXS Loopstart (Default) (Slaves: 02)
Channel 03: FXS Loopstart (Default) (Slaves: 03)
Channel 04: FXS Loopstart (Default) (Slaves: 04)

4 channels configured.


/etc/zaptel.conf

fxsls=1-4
loadzone = us
defaultzone=us

/etc/asterisk/zapate.conf

бла-бла-бла
signalling=fxs_ls
бла-бла-бла

где вместо бла-бла-бла - правильный конфиг.

Пробовал разные tonezones в zaptel.conf - не помогло. Пробовал гуглить на предмет "chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6" - одна ссылка http://www.asterisk-support.ru/forums/development/897807797625/view Но решения там нет.. Прошу помочь разобраться. Заранее спасибо.

поменяй на fxo.

/etc/asterisk/zapate.conf

бла-бла-бла
signalling=fxs_ls

а здесь правильно

логика у этих товарищей (а может не товарищей) такая - порт fxo, сигнализацию он выдает для fxs.


ps: если ничего не путаю - проверять лень

как раз надо fxs сигнализацию ставить, и правельную сигнализацию

signalling=fxs_ks , а не ls. при ls будет именно так себя вести.

Не помогло.

И еще вопросик:
Почему, когда делаю reload в Asterisk CLI - он возвращает
Oct 17 23:53:32 WARNING[2985]: chan_zap.c:10874 setup_zap: Ignoring signalling

Сейчас такая конфигурация:
/etc/zaptel.conf

fxsks=1-4
loadzone = ee
defaultzone=us

/etc/asterisk/zapata.conf

signalling=fxs_ks


Connected to Asterisk 1.2.12.1 currently running on zap (pid = 2427)
Verbosity was 0 and is now 6
Core debug was 0 and is now 1
-- Starting simple switch on 'Zap/1-1'
Oct 18 17:33:01 NOTICE[2460]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/1-1", "") in new stack
-- Executing Wait("Zap/1-1", "1") in new stack
-- Executing Goto("Zap/1-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/1-1", "1") in new stack
Oct 18 17:33:02 WARNING[2460]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing BackGround("Zap/1-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 18 17:33:07 WARNING[2460]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1
-- Hungup 'Zap/1-1'
-- Starting simple switch on 'Zap/1-1'
Oct 18 17:33:16 NOTICE[2465]: chan_zap.c:6073 ss_thread: Got event 18 (Ring Begin)...
-- Executing Ringing("Zap/1-1", "") in new stack
-- Executing Wait("Zap/1-1", "1") in new stack
-- Executing Goto("Zap/1-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/1-1", "1") in new stack
Oct 18 17:33:17 WARNING[2465]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing BackGround("Zap/1-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
Oct 18 17:33:22 WARNING[2465]: chan_zap.c:3926 zt_handle_event: Ring/Off-hook in strange state 6 on channel 1
-- Hungup 'Zap/1-1'
-- Starting simple switch on 'Zap/1-1'
Oct 18 17:33:36 WARNING[2470]: chan_zap.c:6149 ss_thread: CallerID returned with error on channel 'Zap/1-1'
-- Executing Ringing("Zap/1-1", "") in new stack
-- Executing Wait("Zap/1-1", "1") in new stack
-- Executing Goto("Zap/1-1", "voicemenu|s|1") in new stack
-- Goto (voicemenu,s,1)
-- Executing Wait("Zap/1-1", "1") in new stack
-- Executing Answer("Zap/1-1", "") in new stack
-- Executing BackGround("Zap/1-1", "welcome") in new stack
-- Playing 'welcome' (language 'en')
-- Hungup 'Zap/1-1'
zap*CLI>

Поменял /etc/zapata.conf -
stop asterisk
ztcfg
start asterisk

полный текст zaptel и zapata приведи. похоже там у тебя куча общибок

вот:

/etc/zaptel.conf
fxsks=1-4
loadzone = ru
defaultzone=us



[channels]
language=en
context=zaptel-inc
signalling=fxs_ks
rxwink=300
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callerid=asreceived
busydetect=yes
busycount=5
callprogress=yes

group = 1
channel => 1
;
group = 2
channel => 2
;
group = 3
channel => 3
;
group = 4
channel => 4


Вроде правильно все...
Описал tonezone для России в zonedata.c и пересобрал zaptel
Так, на всякий. Попробую пока
{35, "ru", "Russia / ex Soviet Union", {800, 3200},
{
{ ZT_TONE_DIALTONE, "425" },
{ ZT_TONE_BUSY, "425/350,0/350" },
{ ZT_TONE_RINGTONE, "425/800,0/3200" },
{ ZT_TONE_CONGESTION, "425/350,0/350" },
{ ZT_TONE_CALLWAIT, "425/200,0/5000" },
{ ZT_TONE_DIALRECALL, "!350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440" },
{ ZT_TONE_RECORDTONE, "1400/500,0/15000" },
{ ZT_TONE_INFO, "!950/330,!1440/330,!1800/330,0/1000" },
},
}
Параметры брал из indications.conf

вы внимателно прочитали то, что написали я и dyer?

Прежде чем давать такие советы прочитайте пожалуйста инструкцию:

http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zaptel.conf

Configuration for the Wildcard TDM400P:

* If your card is a TDM04B (four FXO modules), put: fxsks=1-4

И не ленитесь проверять.