возникла след. проблема:
Unable to do INITIAL ProSLIC powerup on module 0
Unable to do INITIAL ProSLIC powerup on module 0

карта :TDM400P

dmesg:
Zaptel Version: 1.4.7
Zaptel Echo Canceller: MG2
Freshmaker version: 71
Freshmaker passed register test
ProSLIC on module 0 failed to powerup within 504 ms (0 mV only)

-- DID YOU REMEMBER TO PLUG IN THE HD POWER CABLE TO THE TDM400P??
Unable to do INITIAL ProSLIC powerup on module 0
Unable to do INITIAL ProSLIC powerup on module 0
Module 0: FAILED FXS (FCC)
Unable to do INITIAL ProSLIC powerup on module 1
Unable to do INITIAL ProSLIC powerup on module 1
Module 1: FAILED FXS (FCC)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules)
Registered tone zone 0 (United States / North America)

cat zaptel.conf
loadzone = us
fxoks=1
fxsks=4
defaultzone=us

ztcfg -vv

Zaptel Version: 1.4.7
Echo Canceller: MG2
Configuration
======================

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
2 channels to configure.